Wires for hardware Moreda has defined the full range of wires that are normally demanded by the hardware sector as stockable products in our warehouses, with the aim of being able to provide you with high-quality service. The standard delivery methods are: Black-annealed wire: rolls of approximately 35 or 50 kg, depending on the diameter of the wire. Galvanised wires, heavy galvanised wires and heavy galvanised wires + Ecover®: rolls of approximately 40 kg, in packages (groups of 10 rolls). 5-kg set-weight rolls in packages (groups of 5 rolls). For diameters of less than 1.50 mm, rolls of approximately 35 kg. In plastic-coated wires, rolls of approximately 35 kg, as well as 5-kg set-weight rolls in packages (groups of 5 rolls). Most frequent diameters with black-annealed surface Diameter (mm.) Strength (kg/mm.²) 1,20 35 ÷ 45 1,30 1,50 45 ÷ 55 2,00 3,00 3,90 4,90 Most common wires with galvanised surface Delivery method Diameter (mm.) Strength (Kg/mm.²) » 40-kg rolls (Packages) 1,80 - 2,00 - 2,20 - 2,40 - 2,70 3,00 - 3,40 - 3,90 - 4,40 - 4,90 45 ÷ 55 » 5-kg rolls (Packages) 1,00 - 1,10 - 1,20 - 1,30 - 1,40 1,50 - 1,80 - 2,00 - 2,20 - 2,40 2,70 - 3,00 - 3,40 » 35-kg rolls 1,00 - 1,20 - 1,30 - 1,50 Most common wires with galvanised and plastic-coated surface Delivery method Diameter (mm.) Colour Strength (Kg/mm.²) » 35-kg rolls 2,00/3,00 2,70/3,90 3,00/4,40 Green RAL 6005 Green RAL 6005 and White RAL 9010 Green RAL 6005 45 ÷ 55 » 5-kg rolls (Packages) 2,00/3,00 2,70/3,90 Green RAL 6005 Green RAL 6005