Posts and accessories To complete its range of fencing, Moreda has a full catalogue of galvanised and plastic-coated posts, as well as extra tensioners with triple duration. Applications Fencing with plastic-coated single-twisted mesh with no barbed wire. With barbed wire (upon request). Fencing using "HJ Moreda" galvanised single-twisted mesh, upon request. With and without barbed wire (except for 1.0-m posts) upon request. Characteristics Galvanised and subsequently plastic-coated posts Its double coating in zinc+polyester affords it exceptional protection against corrosion. Posts hot galvanised by immersion The thickness of the zinc layer means it has great resistance against corrosion. Extra tensioner, triple duration. Very high resistance against corrosion. Technical characteristics Galvanised and plastic-coated posts: Manufactured using sheets of galvanised steel according to the UNE-36-130-91 standard. Subsequently coated with a layer of polyester to an average thickness of 125 microns. Colour green RAL 6005 in the standard version. Galvanised posts: Hot galvanised by immersion according to the UNE 37508-88 standard; minimum layer of zinc 400 grams/mІ. (56 microns). Extra tensioner, triple duration: New surface treatment using zinc, aluminium and copper. Types of posts used in fencing Type of post Accessories Base Post + 1 Tension bar + 1 flat bar Middle POST Kneebrace Post + 2 Tension bars Square Post + 2 Tension bars + 2 flat bars All the posts are manufactured using tubes with an outer diameter of 48 mm and a thickness of 1.50 mm. The tension bars use tubes with an outer diameter of 40 mm and a thickness of 1.50 mm. They have a non-detachable metal cap. Standard measurements Posts For 1.0-m mesh For 1.5-m mesh For 2.0-m mesh Tensioners Cardboard boxes with 200 units per box